Filter
Top Products
English
30
2. Starter Disable
Mise hors circuit du démarreur
Desactivación del arranque
A starter cut relay is provided with the SEC-
8028 Security System for your protection.
When the system is triggered into an alarm
mode, the starter cut relay will prevent the
engine from being started.
The starter cut relay can be selected to be
a normally closed or normally open type.
The difference between the two types is the
connection between the starter motor and
the ignition switch.
On a normally closed type, the starter motor
is normally connected to the ignition switch.
When the system is tripped, the connection
between the starter motor and the ignition
switch is severed and the car will not start.
On a normally open type, the starter motor
is normally disconnected from the ignition
switch. Only when the system is in a
disarmed, panicked, or valet mode will the
starter motor be connected to the ignition
switch. If the main unit is disconnected or
removed, the car cannot be started.
For more information regarding the different
types of starter disabling systems, please
consult your local Alpine dealer.
Protection Features