Aastra Telecom 600 Automobile Alarm User Manual


 
Remote Transmitter Description
The Astra 600 is supplied with two 5-button Remote Transmitters used to control system
operations.
Button 1
Arms the system and when held for 2 seconds, activates the system’s Panic feature.
Button 1 also locks the doors when the system is in Valet Mode.
Button 2
Disarms the system. Pressing Button 2 again operates the Passenger Unlock feature (if
installed). Button 2 also unlocks the doors when the system is in Valet Mode.
Button 3
Activates the Auxiliary 1 output. This output will remain on for as long as the button is
pressed.
Button 4
Activates the Auxiliary 2 output. This output will remain on for as long as the button is
pressed.
Button 5
is the Page
Shift
button. The Page Shift button will change the function of Buttons 1
through 4 each time it is pressed, allowing access to additional features or multiple car operation.
Each time the Shift Button is pressed, the LED on the transmitter will illuminate and the
transmitter functions will shift to the next page, allowing access to another set of features. Once
shifted to another page (there are 4 pages total), the transmitter will remain on that page for 10
seconds or until a button is pressed, then return to page 1. Each time a transmitter button is
pressed and held, the LED will flash a number of times to indicate from which page it is
transmitting. Under normally operation, only pages 1 and 2 are used. Pages 3 and 4 are usually
used for Two Car Operation (see page 3).
Shift then Button 1
Arms the system silently.
Shift then Button 2
Disarms the system silently.
Shift then Button 3
Activates the Auxiliary 3 output. This output will remain on for as long as the
button is pressed.
Shift then Button 4
Activates the Vehicle Locator feature which flashes the parking lights and
chirps the siren 5 times. This feature is useful to help locate the vehicle in a crowded parking
lot.
Page 2 - Astra 600
Remote TTransmitters
Button 1 Button 2
Button 5
LED
Button 3 Button 4