3M 1010 Automobile Accessories User Manual


 
Health and Safety Information
Device Safety Compliance
The 3M™ PPS™ SUN GUN™ Color Matching Light System complies with standard
IEC/EN 61010-1 as demonstrated by the CB Scheme Certificate and test report issed by
Underwriters Laboratories Inc. (UL).
The 3M™ PPS™ SUN GUN™ Color Matching Light System is listed as Laboratory
Equipment and carries the UL and c-UL marks based on compliance to the standards UL
61010-1 and C22.2 No. 1010-1.92.
The 3M™ PPS™ SUN GUN™ Color Matching Light System is CE marked because it
complies with the requirments of the Low Voltage Directive 73/23/EEC as confirmed in
the Declaration of Conformity.
EMC Compliance
The 3M™ PPS™ SUN GUN™ Color Matching Light System complies with IEC/EN-1
61326 as confirmed in the Certificate of Compliance generated by 3M.
The 3M™ PPS™ SUN GUN™ Color Matching Light System complies with the EMC
requirements of the CE mark EMC Directive 89/336/EEC.
Note: The 3M™ PPS™ SUN GUN™ Color Matching Light System has been tested and
found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, and can radiate radio frequency energy and, if not installed and
used in accordance with this Instruction Manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference that the user will be required to correct and pay for.
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigencies due Reglement sur
le materiel brouilleur du Canada.
Battery
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the Nickel-cadmium
battery or (Battery Pack) is your indication that 3M has paid in advance the costs to
recycle the battery or (Battery Pack) at the end of its useful life. In some areas it is
unlawful to place nickel-cadmium batteries in the trash or municipal solid waste stream.
The RBRC program provides an environmentally responsible alternative.
RBRC, in cooperation with 3M and other battery users, has established programs in the
United States to facilitate the collection of used nickel-cadmium batteries. Help protect
our environment and conserve natural resources by calling 1-800-822-8837 to find a
location to recycle used batteries, or call your local recycling center to learn where in your
area to drop off the used battery.
CAUTION
To reduce the risk associated with hot surfaces:
- Do not touch the glass surface of the lamp assembly
- Do not replace lamp assembly when hot, allow to cool down before replacement
To reduce the risk associated with a hot battery surface:
- Do not allow the battery terminals to be short circuited
To reduce the risk associated with environmental contamination due to lead
in the solder:
- Always dispose of the 3M™ PPS™ SUN GUN™ Light, Battery Pack, Battery
Charger or Power Supply in accordance with federal, state and local requirements.
To reduce the risk associated with environmental contamination due to the
NiCd or NiMH battery pack:
- Recycle the 3M™ PPS™ SUN GUN™ Battery Pack according to federal, state and
local requirements.
To reduce the risk associated with fire as a result of the build-up of
contaminants:
- Never store the 3M™ PPS™ SUN GUN™ Light, Battery Pack or Battery Charger
where there is the possibility for contaminate build-up.
To reduce the risk associated with fire:
- Do not modify the 3M™ PPS™ SUN GUN™ Light, Battery Pack, Battery Charger
or Power Supply.
- Use only 3M designated bulb assembly (PN 16399)
- Do not allow any foreign materials to enter the battery pack cavity of the 3M™
PPS™ SUN GUN™ Battery Charger.
To reduce the risk associated with cuts from a broken lamp assembly:
- Use care when replacing a broken lamp assembly
Power Supply Specifications
Power supply Operating Condition Units
Voltage Range 100-240 Volts AC
Frequency 50/60 Hertz
Current 0.6 Amps
Environmental Operating Conditions
Environmental ConditionsOperating Condition Units
Indoor use only
Altitude 2000 (max) meters
Operating Temperature 5 – 40 C
40 - 104 F
Storage Temperature (-5) - 50 C
25 - 120 F
Relative Humidity 20-80 (non-condensing) %
Voltage Range 24 Volts DC
Frequency DC
Current .6 Amps
Installation/Over Voltage Category II
Pollution Degree 2
3 4