GL-1010 Administrator’s Guide 119
5 Assign the printer to the Print Server. Note the printer
number.
Print Server Setup
Set Protocol
1 Launch your Web browser and enter the IP address of the
GL-1010 you want to configure to access the embedded Web
site, TopAccess. (Refer to
Opening TopAccess on page 64.)
If you do not know the IP address, you can find it by using
GL DocMon (see the GL-1010 Operator’s Guide (Basic) for
details).
2 Click the Login link and enter the administrative username
and password.
3 Click the Administration tab.
4 Click the Setup tab.
5 Click the Network link.
6 From the IPX/SPX settings group, select the Enable protocol
option and then select the applicable
Frame Type. Accept the
default, Auto, to automatically sense the Frame Type.
