Setting up NetWare Print Server 39
26
Select “((NONE))” in the “Printer Type” list and select “Novell Port
Handler” in the “Port Handler Type” list. Then click [OK].
The Configure Port Handler for Printer Agent dialog box appears.
27
Continue the procedure according to which connection type to be
used.
P.39 “Configuring the LPR connection in the TCP/IP network”
P.39 “Configuring the queue based connection in the IPX/SPX network”
Configuring the LPR connection in the TCP/IP network
1
In the Configure Port Handler for Printer Agent dialog box, select
“Novell LPR Printer Gateway (SNMP)” or “Remote (LPR on IP)” and
click [Next].
2
Enter the IP address of this equipment in the “Host Address” field,
and click [Finish].
It takes about 60 seconds to load the Printer Agent. After it finishes loading the Printer
Agent, the Select Printer Drivers dialog box appears.
3
Select the printer drivers to be installed in the “Printer Drivers” list
at each OS tab, and click [Continue].
The Information dialog box appears.
4
Click [OK].
It takes about 60 seconds to complete the creation of the NDPS Printer object.
5
Double-click the NDPS Printer object that you created.
The NDPS Printer dialog box appears.
6
Click [NDPS Remote Printer Management].
7
Check the “Install to workstation in this container” and click
[Update].
8
Click [OK] to close the NDPS Printer dialog box.
Configuring the queue based connection in the IPX/SPX network
1
In the Configure Port Handler for Printer Agent dialog box, select
“Forward Jobs to a Queue” and click [Next].
2
Enter the NDS queue name in the “Queue Name” field and the user
name in the “Queue User Name” field. Then click [Finish].
The Select Printer Drivers dialog box appears.
The NDS queue must be created.
