1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33058
1.6 Options
E1- 5
1.6 Options
Option Name Type Description
Swing cutter module B-4205-QM-R A stop and cut swing cutter.
Rotary cutter module B-8204-QM-R Rotary cutter
Strip module B-9904-H-QM-R This allows use of on-demand (peel-off) operation or to take-up
labels and backing paper together when using the rewind guide
plate. To purchase the strip module, please inquire at your local
distributor.
Ribbon saving module B-9904-R2-QM-R This module moves the print head up and down by using a
solenoid to minimise ribbon usage as far as possible.
Expansion I/O
interface board
B-7704-IO-QM-R Installing this board in the printer allows connection to an external
device with the exclusive interface.
PCMCIA interface
board
B-9700-PCM-QM-R This board enables the use of the following PCMCIA cards.
ATA card: Conforming to PC card ATA standard
Flash memory card: 1MB and 4MB cards (See Section 2.8.)
Built-in LAN interface
board
B-9700-LAN-QM-R This board enables the printer to be used in a LAN network.
USB interface board B-9700-USB-QM-R Installing this board enables a connection to a PC which has a USB
interface.
RFID module B-9704-RFID-U1-US-R
B-9704-RFID-U1-EU-R
B-9704-RFID-H1-QM-R
Installing this module enables read and write of RFID tags.
Applicable frequency range differs depending on the module types:
U1-US: UHF, 902MHz to 928MHz
U1-EU: UHF, 869.5MHz
H1-QM: HF, 13.56MHz
Fanfold paper guide
module
B-4905-FF-QM-R This is a paper guide exclusively used for fanfold paper.
Wireless LAN board B-9700-WLAN-QM-R Installing this PC board allows a communication by wireless LAN.
OTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA
TEC Head Quarters.
