A SERVICE OF

logo

37
1. Presenter (TUP482)
(1) Disconnect the power cord from the AC outlet.
(2) Remove:
Screws 4 pcs. [1]
Presenter Holder L and R [2]
Presenter [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the
Presenter.
Presenter (TUP492)
(1) Disconnect the power cord from the AC outlet.
(2) Remove:
Screws 3 pcs. [1]
Presenter [2]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the
Presenter.
[2]
[3]
[1]
[2]
[1]
[2]
[1]
[1]