A SERVICE OF

logo

79
N=4 (ESC/POS mode)
n1 :Always “0”
n2 :Always “0”
(Default)
Parameter :n3
Parameter Setting “0”’ “1” “2” “3”
n3 DTR signal during
setting status
transmission
See belows
n4 Data receipt error “?”
printed
Ignored “?”
printed
Ignored
Setting (DTR signal) “0”, “1” “2”, “3”
1. From when the power is turned on or
I/F reset until communication possible
BUSY BUSY
2. Test printing BUSY BUSY
3. Paper feed by paper feed switch BUSY
4. Stop due to no paper BUSY
5. During waiting for switch input in
macro execution
BUSY
6. Other error BUSY
7. Receiving buffer full BUSY BUSY