● Left margin moves to the right during printing
Probable Cause
Action
The print head is not moving Check that the ribbon and paper are cor-
correctly.
rectly installed. See “Installing ribbon car-
tridge” inChapter2 and “Loading paper” in
Chapter 3.
Problem with the application Refer to your application program manual.
program.
r
The adjustment lever is in the
Reset the adjustment lever. See “Adjusting
wrong position.
the printing gap” in Chapter 3.
● Printer is printing beyond side edge of forms
Probable Cause
Paper is adjusted incorrectly.
Problem with the application
program.
A print head jam caused by
the ribbon or a paper jam.
Action
Adjust both paper guides and the paper.
Refer to your application program manual.
Make sure that the ribbon cartridge is cor-
rectly installed. See “Installing the ribbon
cartridge” in Chapter 2.
Clear the paper jam.
● Printer case is hot to the touch
Probable Cause
Action
Printer’s vents are blocked.
Move object away from the air vents, in-
cluding the bottom of the printer.
● Printer is noisy
Probable Cause
Action
The printer vibrates.
Move any objects that touch the printer.
Ensure that the printer is on a level, sturdy
surface.
Printer covers are open.
Close covers.
