– 17 –
If the position into which the download character is written
(the character code) is defined as (21)
H, (22)H, (23)H, then
we have n
1 = (21)H, n2 = (23)H The relation between the
character pattern data and the print head assigns the 9 pin as
unused. Therefore, m
0 = (80)H.
If data m
1 to m18 is converted to hexadecimal, it appears as
follows.
DATA TRANS
-
MISSION
PRINT SAMPLE
Data Binary Hex.
m1 10100000 A0
m2 10100000 A0
m3 10111110 BE
m4 10100000 A0
m
5 10100000 A0
Data Binary Hex.
m1 10011000 98
m2 11100100 E4
m3 10000010 82
m4 11100100 E4
m
5 10011000 98
Data Binary Hex.
m1 11111111 FF
m2 10000011 83
m3 10111101 BD
m4 11000001 C1
m
5 11111111 FF
(1) Difine download (1B)H (26)H (00)H (21)H (23)H (80)H
(A0)H (A0)H (BE)H (A0)H (A0)H
(80)H (98)H (E4)H (82)H (E4)H (98)H
(80)H (FF)H (83)H (BD)H (C1)H
(FF)H
(2) Select download (1B)H (25)H (01)H
(3) Character code (21)H (22)H (23)H (A0)H
(4) Cancel download (1B)H (25)H (00)H
(5) Character code (21)H (22)H (23)H (0A)H
CODE
ESC a n
(1B)
H (61)H n
FUNCTION
n-line feed
OUTLINE
After printing the data in the current line, n lines are fed by this
code. The value of n ranges from 1 to 120.
CODE
ESC C n
(1B)
H (43)H n
FUNCTION
Sets page length in lines
OUTLINE
This code sets the length of a page to n lines. The value of n
ranges from 1 to 120. On initialization, the page length
default condition will be 42 lines. The line feed pitch is one-
sixth inch.
