PRINTER OPTIONS
F.6
4
Hold the memory option with the
connection points pointing toward
the connector and position the
notch as shown. Insert the
memory option all the way into
the connector at a 30
O
angle, and rotate it left until it
snaps into place.
5
Make sure both metal clips on the
connector are fastened, and the
two pins on each of the
connectors are pushed through
the holes on the memory option.
6
Continue with ‘Closing the Printer
Cover’ on page F.3.
7
Set the printer memory item on
the printer tab of the properties
dialogue box to the value of the
added printer memory.
Notch
Connection points
Printer Memory
3
Unpack the memory option.
Notes: Avoid touching the connection
points along the edge.
Save the packaging.
