MONITOR MODES
14
2.2 MIX MODE
As its name implies, Mix mode is typically used during the
Mixing stage of your project – especially when you have
multiple sets of monitors to reference your mix on (i.e.,
Nearfields & Mains).
Mix mode enables the [Stereo A], [Stereo B] & [Stereo C]
Stereo Control buttons on the Monitor Station Remote and puts
the FireStudio in Mix mode – allowing you to toggle your
output between different speaker sets.
General purpose outputs 5-8 are reserved for Stereo Control
and are disabled in the FireStudio Control Console
as shown in
the screenshot image at left
.
The Main Level control knob on the Monitor Station Remote
controls the volume level of all active Speaker sets equally
when the FireStudio is in Mix mode.
Outputs 1-4, Main L/R, ADAT, S/PDIF & Phones 1-3 function
as in Track mode.
