77Troubleshooting
Lexmark Z65
Lexmark Z65n
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Using this
Guide...
www.lexmark.com
Printer is plugged in, but does not print
Make sure:
• The printer is on and the printer cable is securely attached at both ends. If your
Lexmark Z65n printer is connected to a network, make sure the network lights on the
printer are on. For help, see Network connection speed light.
• The paper is loaded correctly and not pushed too far into the printer. For help, see
Basic printing. If the paper is jammed, see Clearing paper misfeeds or jams.
• The printer is not being held or paused. To check the printer status:
a From your desktop, double-click the Lexmark Z65 printer icon.
b Make sure the Hold button is not selected.
• The printer is set as the default printer. To set the printer as the default:
a From your desktop, click the Lexmark Z65 printer icon.
b From the Printing menu, choose Select Default Printer.
After you check these items, try Printing a test page.
If the test page prints, the printer is functioning properly. If it does not print, see Test page
does not print.
