Inserting a memory card Inserting a flash drive
Notes:
• Insert the card with the brand name label facing
up.
• Make sure any arrows on the card point toward
the printer.
• If necessary, connect the memory card to the
adapter that came with it.
• Make sure that the memory card inserted is
supported by the printer. For more information,
see “Supported memory cards and file types” on
page 17.
• The card reader light comes on when a memory
card is inserted and blinks when a memory card is
being accessed.
Notes:
• The flash drive uses the same port that is used
for a PictBridge camera cable.
• An adapter may be necessary if your flash
drive does not fit directly into the port.
Warning—Potential Damage: Do not touch any cables, any
network adapter, any connector, the memory device, or the
printer in the areas shown while actively printing, reading,
or writing from the memory device. A loss of data can occur.
The Memory Device screen appears on the display.
Notes:
• If the printer does not recognize the memory device, then remove and reinsert it.
• If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a
memory card is in the card slot, then the display prompts you to choose which memory device to
use.
Supported memory cards and file types
Memory card File type
• Secure Digital (SD)
• Secure Digital High Capacity (SDHC)
• Micro Secure Digital (with adapter) (Micro SD)
• Mini Secure Digital (with adapter) (Mini SD)
• MultiMedia Card (MMC)
• Reduced Size MultiMedia Card (with adapter)
(RS‑MMC)
• MultiMedia Card mobile (with adapter)
(MMCmobile)
• Memory Stick
• Memory Stick PRO
• Memory Stick Duo (with adapter)
• Memory Stick PRO Duo (with adapter)
• xD‑Picture Card
• xD‑Picture Card (Type H)
• xD‑Picture Card (Type M)
Documents:
• .pdf (Adobe Portable Document Format)
Images:
• .jpg, .jpeg, .jpe (Joint Photographic Experts
Group)
• .tiff, .tif (Tagged Image File Format)
About your printer 17
