Fax Setup
Getting the printer ready to fax
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning
storm.
Setting up the printer as a copier only or fax only
Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1 Unpack the printer.
Notes:
• Place the printer near the computer during setup. If you're setting up on a wireless network, you may move
the printer after setup is complete.
• Contents, such as the number of print cartridges, may vary by model and region.
• Do not attach the USB cable until prompted to do so.
1
2
3
W
F
I
I
P
R
I
N
T
I
N
G
1
2
3
4
5
6
7
8
9
1
Power cord
2
Telephone cord
3
Printer software CD
4
USB cable or installation cable
Note: Your printer model may not ship with a USB cable. Purchase a USB cable separately.
Fax Setup
11
