Diagnostic Aids 3-24
4059-XXX
The following is printed on page 1.
• Diagnostic EP Setup:
– fuser temperature, warm up time, transfer, print contrast and
charge roll settings.
• Contents of the Diagnostic Error Log.
• Printer configuration information:
– printer serial number, controller code level, engine code
level, operator panel code level, smart option code levels,
font versions, and so on.
• Values for the Quality Menu settings used to print the pages.
Printing Menu Settings Page
Note: This test page must be printed on letter, legal or A4 paper.
To print the Menu Settings Page:
1. Select the TESTS MENU.
2. Select Print Menus from the TESTS MENU.
The page contains the following information:
• A list of all the printer settings contained in the control panel
menus and their values.
• A list of the installed options and features such as RAM memory
SIMMs, optional input paper trays, envelope feeder, duplexer,
output bins, flash or disk.
• Printer information such as serial number, page count, installed
RAM, engine code level, RIP code level, envelope feeder code
level, tray 1-5 code levels, output bin 1-3 code levels, control
panel code levels, font ROM version and SRAM availability.
