The draft alignment bars print.
Note: The current value is the number printed below the bars.
4 To set Draft, select the best row of alignment bars from the 01–07 printout.
a Press Micro or Micro to select the best alignment by number, or keep the current value.
b Press Set TOF to save your selection.
After you make your selection, the printer prints a single row showing the current alignment setting.
c The printer automatically starts printing the alignment bars for Near
‑
Letter
‑
Quality (NLQ).
The current value is the number printed below the bars.
Solving printing problems
Printer test works, but the printer does not print when attached to the computer
These are possible solutions. Try one or more of the following:
• Turn the printer and the computer off.
• Make sure the printer cable is correctly connected at both ends.
Troubleshooting 65
