A SERVICE OF

logo

L2TP
If connected to the
Internet using an L2TP
(dial-up xDSL) modem,
the ISP will provide a
server IP account and
password. Choose this
option and enter the
required information.
Step 5. Set Wireless LAN connection
Click “Enable” to enable the
wireless LAN, then type the
ESSID in the text box and select
a communications channel. The
ESSID and channel must be the
same as wireless devices
attempting to communicate to
the router.
Step 6. Setup completed
Setup Wizard is now completed.
The new settings will be effective
after the router is restarted. Click
“Restart” to reboot the router. If
you do not want to make any
changes, click “Exit” to quit
without any changes. You can
go back to modify the setting by
clicking “Back.”
19
CONFIGURATION