8 Chapter 1 Printer basics ENWW
User interface
● Graphic display on control panel
● Embedded Web server to gain access to support and order supplies (for network-connected
printers)
● HP Toolbox software to provide printer status and alerts, configure printer settings, and print
internal printer information pages
Language and fonts
● HP Printer Command Language (PCL) 6 driver
● HP PCL 5e driver for compatibility
● Printer Job Language (PJL)
● Printer Management Language
● 80 scalable TrueType typefaces
● HP PostScript 3 emulation (PS)
Print cartridge
● No-shake cartridge design
● Authentication of HP print cartridges
● No-pull tab with automatic seal-tab removal
● Internet-enabled supplies ordering
Paper handling
● Input
• Optional Tray 1 (multipurpose tray): A multipurpose tray for paper, transparencies,
labels, and envelopes. Holds up to 100 sheets of paper or 10 envelopes.
• Trays 2 and 3: Two 500-sheet trays. These trays automatically sense commonly used
standard paper sizes up to A3- or 11 x 17-size media, and can print on custom-size paper.
• Optional Tray 4 (2,000-sheet input tray): This tray automatically senses commonly used
standard paper sizes up to A3 or 11 x 17, and can print on custom-size paper.
• Optional duplex printing accessory: Provides two-sided printing (both sides of paper).
● Output
• Standard output bins
• Standard top bin: The standard top bin is located at the top of the printer and is the
factory default bin. This bin can receive up to 500 sheets of paper.
• Standard left bin: The left output bin is located on the left side of the printer. This
bin can hold up to 100 sheets of paper.
• Optional 3,000-sheet stacker: A stacking device.
• Upper bin (face-up): Holds up to 100 sheets of paper.
• Lower bin (face-down): Holds up to 3,000 sheets of paper.
• Optional 3,000-sheet stacker/stapler: Provides multiposition stapling for up to 50 sheets
of paper per job, or equivalent job height of 5 mm (depending on paper thickness).
• Upper bin (face-up): Holds up to 100 sheets of paper.
• Lower bin (face-down): Holds up to 3,000 sheets of paper.
• Optional Multifunction finisher: Provides 1,000 sheets of stacking capacity, stapling for
as many as 50 sheets of paper per document, plus folding and saddle stitching of
booklets that contain up to 10 sheets of paper.
• Upper bin (straight paper path): Holds up to 1,000 sheets of paper.
• Lower booklet bin: Holds up to 50 booklets.
