Menu item Sub-menu item Values Description
AT VERY LOW BLACK CARTRIDGE STOP
PROMPT TO CONTINUE
CONTINUE*
Select what the product should
do when the print cartridge is very
near the end of its estimated life.
STOP: The product stops until
you replace the cartridge.
PROMPT TO CONTINUE: The
product stops until you clear the
prompt message.
CONTINUE: The product
provides an alert message, but it
continues printing.
USER DEFINED LOW BLACK CARTRIDGE Use the arrow buttons or the
numeric keypad to enter the
percentage of estimated
cartridge life at which you want
the product to alert you.
Configure device menu
Use the CONFIGURE DEVICE menu for the following tasks:
●
Change the default printing settings.
●
Adjust the print quality.
●
Change the system configuration and I/O options.
●
Reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display: Press the Menu button
, select the CONFIGURE DEVICE menu, and then select the
PRINTING menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Menu item Values Description
COPIES Range: 1 - 32000 Set the default number of copies for print
jobs. The default number is 1.
DEFAULT PAPER SIZE A list of available sizes appears. Set the default paper size.
DEFAULT CUSTOM PAPER SIZE
●
UNIT OF MEASURE
●
X DIMENSION
●
Y DIMENSION
Set the default size for any custom print job.
178 Chapter 3 Solve problems ENWW
