A SERVICE OF

logo

3. Remove the antistatic sponge (callout 1).
Figure 2-94 Remove the laser/scanner (2 of 5)
1
4. Disconnect one connector (callout 1) and one FFC (callout 2).
Reinstallation tip Make sure that you correctly reconnect the FFC when the laser/scanner is
installed. If the FFC is not correctly reconnected, a 51.1 ERROR will appear on the control-panel
display.
Figure 2-95 Remove the laser/scanner (3 of 5)
1
2
108 Chapter 2 Removal and replacement ENWW