A SERVICE OF

logo

Main assemblies
Tray 1 (multipurpose tray) pickup roller
CAUTION: Do not touch the surface of the roller. Skin oils deposited on the roller might cause print-
quality problems.
1. Press the cartridge-door release button, and then open the cartridge door. Make sure that the door
is completely open.
Figure 2-60 Remove the Tray 1 (MP tray) pickup roller (1 of 2)
2. Release two tabs, and then rotate the roller out and away from the product to remove it.
TIP: It might be easier to release the tabs by using a small flat blade screwdriver.
Figure 2-61 Remove the Tray 1 (MP tray) pickup roller (2 of 2)
86 Chapter 2 Removal and replacement ENWW