Mailbox/Collator
Appendix C: Installing and Removing Printer Options ❖ C-39
4
Unpack the Mailbox/Collator and grasp
it by the front and rear hand holds.
Do not allow the rear door of the
Mailbox/Collator to open.
If you must set the Mailbox/Collator
down, lay it on its right side.
5
Insert the Mailbox/Collator positioning
hook into the outer-most slit in the
exhaust grill on top of the printer.
To avoid damage to the positioning
hook, do not twist the Mailbox/
Collator to the right or left while
lowering it into position.
6
Gently guide the Mailbox/Collator down
to the printer, aligning the Mailbox/
Collator connector plug with the
receptacle in the printer.
Make sure the Mailbox/Collator is
firmly seated.
kug-appc Page 39 Thursday, March 6, 1997 4:51 PM
