A SERVICE OF

logo

Chapter General Information 19
Liner
The liner is the carrier sheet for the label material. This must provide
stability for the reliable pick-up and transport of the label stock
through the printer.
Recommendations
l Regularly inspect your labels after printing for any indication of
label edges lifting or adhesive contamination on the print surface.
If either of these problems are observed, it is recommended that
you discontinue use of that box or lot number and discuss the
problem with your label supplier.
l If many sheets of labels are being continuously run, periodically
run several sheets of paper through the printer to clean any
contamination on label stock that might have deposited.
l Run full sheets of labels. Reprinting unused portions can
increase the risk of label peeling and adhesive contamination.