EN
Chapter 2 Printing Tasks 43
Printing on Labels
Note Only use labels recommended for laser printers. See Media
Specifications for more details.
! Print labels from Tray 1.
! Load labels print-side up.
! Use the rear output bin for labels.
! Remove label sheets from the output bin as they are printed to
prevent them from sticking together.
! Do not use labels that are separating from the backing sheet or
are wrinkled or damaged in any way.
! Do not use label sheets with the backing sheet exposed or
partially used label sheets.
! Do not feed a sheet of labels through the printer more than
once. The adhesive backing is designed for one pass through
the printer.
CAUTION If a sheet of labels becomes jammed in the printer, remove the toner
cartridge and then see Clearing Paper Jams to remove the jammed
labels.
Label Orientation
(Print-side up, top in)
