A SERVICE OF

logo

3. Slide the left take-up reel assembly (1) to insert the left media hub into the core tube and tighten the
stop screw (2) on the left take-up reel assembly.
4. Load roll media into the printer
Lift the media lever (1)
Load the media
Lower the media lever
5. Feed the media into the printer using the FORM FEED menu on the front panel until there is sufficient
media at the front of the printer to attach the media to the core tube.
Press the ONLINE key.
Press the SHIFT key to display the FORM FEED option.
Press the
key to feed media through the printer.
ENWW Use the take-up reel 51
How do I load/unload media