Menus 5-9
• Manual Calibrations — allows you to calibrate the printer
visually, without the printer’s digital imaging sensor. Inaccu-
rate judgments by the operator during these tests could
result in substandard output. See “Manual Calibrations” on
page 4-9 for instructions.
• Manual Bidi Registration
• Manual X Head Registration
• Manual Jet Mapping — the manual version of AutoJet
• Jet Status Lines — prints the Manual Jet Mapping pat-
tern without running the calibration
• Media Feed Calibration
• Print Jet-Out Lines — prints a version of the prime bars
(see page 5-3), in which missing jets that are replaced
are marked with a black square.
• Default Registration Data — resets all registration data.
Since there is no registration data after running this
option, all printhead calibration values must be reestab-
lished by running the calibrations.
• AutoTune (roll-fed media only) — schedules jet mainte-
nance to run automatically after a certain number of prints
have printed. See “AutoTune” on page 4-4 for instructions.
