Installation on Windows
Installation Guide 35
Install and Set Up the Driver
On each PC that will send jobs to the printer, install the driver for the card printer. Follow the
steps in "Network Installation Using a Print Server & Bidirectional Communication" on page
27 with the following changes:
• Make sure that each printer has a unique name (such as Card Printer 1 or Card Printer
2) on the PC.
• Make sure you are logged in as the Administrator. (Users and Power Users cannot
complete this task successfully.)
• For step 16, enter the print server name or IP address of the
print server. If your network uses DHCP, use the print server
name (not the IP address, which the network can change).
• The Print Sample Card button in the Printer Toolbox is enabled
when the printer and driver communicate normally. If the Print
Sample Card button is gray, check the following:
— The printer is suspended. Click the Resume button.
— The printer is busy processing a print job sent by another user on the network.
— The printer is paused. Check that the Status Light on the front of the printer is steady
green.
See "Printing Cards Using Bidirectional Communication" to print cards.
