Before You Install
Installation Guide 7
• Place the printer in an environment with temperatures ranging from 60° F to 95° F (15° C
to 35° C).
• Use a single phase, 3-wire, grounded receptacle.
• Keep all dust, dirt, food, and liquids away from the printer.
• Keep paper and foreign materials off the printer.
• Place the printer on a sturdy, level surface.
• Place the printer away from direct sunlight.
• Do not place printer near heat ducts, fans, or other air vents.
• Do not use the printer for purposes other than the intended use.
• Prevent debris from entering the printer.
• Place the printer in a clean office environment, protected from any type of construction.
Electrical Requirements
The power supply is rated as follows:
Printer Model
Voltage, AC
#
Cycle, Hz
#
Amps
Manual Feed 100-120, 220-240 50-60 3.0
Simplex 100-120, 220-240 50-60 3.0
Duplex 100-120, 220-240 50-60 3.0
Laminating 100-120, 220-240 50-60 3.0
#. Self-adjusting
