Media advance calibration
Media advance calibration is defined by using the M.ADV menu. Press the ► key to define and set
values.
Media advance calibration print
Select MEDIA ADV PRINT to print a calibration pattern that will indicate optimal media advance values.
Two patterns are available: the ROUGH pattern prints a media advance pattern in 0.25% steps between
99.0 and 101.0 %; the DETAIL pattern prints a media advance pattern in 0.06% steps starting from the
current setting ±0.12%.
Use the ROUGH pattern to obtain your initial values; if greater accuracy is required, use the DETAIL
pattern. The print mode selected will also affect media advance calibration patterns.
Press the CANCEL key to interrupt printing.
Parameters:
● ROUGH (NORMAL) — standard and high speed print modes
●
ROUGH (H-QUAL) — high quality print mode
●
ROUGH (H-DENS) — high density print mode
● ROUGH (DRAFT) — draft print mode
● ROUGH (H-QUAL2) — high quality print mode
●
ROUGH (H-DENS2) — high density print mode
●
DETAIL (NORMAL) — standard and high speed print modes
● DETAIL (H-QUAL) — high quality print mode
● DETAIL (H-DENS) — high density print mode
●
DETAIL (DRAFT) — draft print mode
Back feed adjustment print
This option prints a pattern so that you can adjust how much back feed is applied to a media type that
you are loading.
158 Chapter 14 Tell me about front panel menus ENWW
