A SERVICE OF

logo

Open as PDF
next previous
Drum Kit - Replacing Drum and Transfer Assembly
Ordering and Replacing Consumables 4-27
Consumables
Installing the New Transfer Assembly
1. Remove the transfer assembly from its packaging.
Caution As you handle the transfer assembly, take care not to touch or damage the
transfer wire.
2. Using the alignment pin located on the end of the transfer assembly, insert the alignment
pin of the transfer assembly into the left rail of the transfer assembly guide and push in
to the end of the guide as shown in Figure 4-31.
Figure 4-31 Inserting the Transfer Assembly into the Guide
Transfer assembly
Wire
Transfer assembly guide
LTR
Transfer assembly
Transfer assembly guide
Pin