A SERVICE OF

logo

Open as PDF
next previous
Drum Kit - Replacing Drum and Transfer Assembly
Ordering and Replacing Consumables 4-23
Consumables
Unpacking the New Drum
1. Open the vacuum sealed bag containing the drum and remove it, as shown in
Figure 4-27.
Figure 4-27 Unpacking Drum and removing the Protective Cover
2. Hold the drum by the top handle, set it on a solid surface, and carefully remove the
protective cover, as shown in Figure 4-27.
Caution Do not touch the surface of the drum. Finger prints and scratches on the surface of
the drum may adversely affect print quality.
Drum