System Setup menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Language (List of available
control-panel
display languages.)
Sets the language in which the control panel displays
messages and product reports.
Paper Setup Default Paper Size Letter
A4
Legal
Sets the size for printing internal reports, faxes, or any print
job that does not specify a size.
Default Paper Type Lists available
paper types.
Sets the type for printing internal reports, faxes, or any print
job that does not specify a type.
Tray 1 Paper Type
Paper Size
Configures the size and type for the tray.
Paper Out Action Wait forever*
Cancel
Override
Determines how the product reacts when a print job requires
a paper size or type that is unavailable or when the tray is
empty.
●
Wait forever: The product waits until you load the
correct paper.
●
Override: Print on a different size paper after a
specified delay.
●
Cancel: Automatically cancel the print job after a
specified delay.
●
If you select either the Override or Cancel item, the
control panel prompts you for the number of seconds
to delay.
Print Quality Color Calibration Calibrate Now
Power-On
Calibration
Performs a full calibration.
●
Calibrate Now: Performs an immediate calibration.
●
Power-On Calibration: Specify the length of time the
product should wait after you turn it on before it
calibrates.
Volume Settings Alarm Volume
Ring Volume
Key-Press Volume
Phone Line Volume
Set the volume levels for the product. The following options
are available for each volume setting:
●
Off
●
Soft
●
Medium*
●
Loud
20 Chapter 2 Control panel menus ENWW
