3. Press l or r to display the word length you need, then
press Enter/Pause. Press Escape/Clear three times to exit
to the Main Menu.
Stop Bits
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps:
1. Press l or r until you see
SERIAL COMM
l Stopbits r
2. Press Enter/Pause. You will see the current setting, for
example:
STOPBITS
1 r
3. Press l or r to display the number of stop bits you need,
then press Enter/Pause. Press Escape/Clear three times to
exit to the Main Menu.
Parity
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps:
1. Press l or r until you see
SERIAL COMM
l Parity r
Communication Values 5-3
