A SERVICE OF

logo

12 Finisher overview ENWW
Paper conveyance path
The finisher consists of five paper paths, as shown in the diagram below.
Sheets are turned over by the MFP's exit page inverter, and then passed to the finisher.
The finisher has two paper entrance connections: one from the MFP, and the other from PI-110
(optional).
Paper conveyance path Finishing mode
1 Non-sort, sort, and group modes
2 Upper tray
3 Staple mode
4 Booklet mode (Q3634A only)
5 Tri-folding mode (Q3634A only)