A SERVICE OF

logo

ENWW Fuser 209
MFP disassembly/assembly
3 Remove two screws to open the fuser
(top).
4 Reinstall the above parts following the
removal steps in reverse.
Removing and reinstalling the
web cover
Procedure
1 Remove the fuser.
2 Remove the fuser front cover.
3 Open the fusing separation claw (upper)
unit and remove two screws inside.
4 Remove two screws to detach the web
cover.
5 Reinstall the above parts following the
removal steps in reverse.
Fixing unit front cover
Screw
Screw
Screw
Fixing unit (top)
Fixing separation
claw (upper) unit
Web cover
Screws (2)
Screw
Screws (2)
Fixing unit front cover