A SERVICE OF

logo

ENWW ADF unit 195
MFP disassembly/assembly
Cleaning the automatic document
feeder paper reverse PS (PS45)/
Reverse/Exit PS (PS46)
WARNING! The interlock, which is
turned off when the front
right or left door opens or
closes, should never be
turned on forcibly with the
ADU stand pulled out.
CAUTION Be sure the power cord has
been unplugged from the
wall outlet.
Procedure
1 Pull out the ADU stand from the MFP.
2 Remove the fuser. See “Fuser” on
page 208.
3 Remove the ADU cover.
4 Remove one screw to remove the ground
plate.
5 Remove the open/close spring from the
paper exit side open/close wire.
6 Remove two screws to remove the
open/close wire assembly.
Open/close
wire
Automatic document
feeder reverse guide
assembly
Screw
Open/close
spring
Ground plate