94 MFP unit explanation ENWW
registration of the preceding paper to
rotate all vertical conveyance rollers, thus
feeding paper to the second paper unit.
2 Signals
a PRCB input signals
1 T1PASS_PS (PS25 to PRCB)
Paper passage detection signal (for
Tray 2 )
[L]: Not detected
[H]: Detected
2 T2PASS_PS (PS26 to PRCB)
Paper passage detection signal (for
Tray 3 )
[L]: Not detected
[H]: Detected
3 T3PASS_PS (PS27 to PRCB)
Paper passage detection signal (for
Tray 4 )
[L]: Not detected
[H]: Detected
4 VF_DOOR_PS (PS29 to PRCB)
Vertical conveyance section
open/close detection signal
[L]: Open
[H]: Closed
b PRCB output signals
1 VFMC1_DRV (PRCB to MC11)
MC11 drive control signal
[L]: MC11 on
[H]: MC11 off
2 VFMC2_DRV (PRCB to MC12)
MC12 drive control signal
[L]: MC12 on
[H]: MC12 off
