B Control panel menus 214
Configure device menu
IPX/SPX ENABLE
FRAME TYPE
SOURCE
ROUTING
ON
OFF
AUTO
EN_8023
EN_II
EN_8022
EN_SNAP
TR_8022
TR_SNAP
AUTO
OFF
ALL ROUTES
SINGLE ROUTE
Selects whether the IPX/SPX protocol stack is enabled (ON) or
disabled (OFF).
Selects the frame type setting for your network
AUTO (default) automatically sets and limits the frame type to
the first one detected.
For an Ethernet network only, frame type selections include
EN_8023, EN_II, EN_8022, and EN_SNAP.
For a Token Ring network only, frame type selections include
TR_8022 and TR_SNAP.
For a Token Ring network only, specify the NetWare Token
Ring Source Routing parameter.
AUTO (default): The type of source routing required on the
network is automatically sensed.
OFF: All packets are sent without source routing, and only
packets from the same ring are received.
ALL ROUTES and SINGLE ROUTES: All packets are sent with
source routing (broadcasts and when the route is unknown).
APPLETALK ENABLE ON
OFF
For an Ethernet network only, selects whether the AppleTalk
protocol is enabled (ON) or disabled (OFF).
DLC/LLC ENABLE ON
OFF
Selects whether the DLC/LLC protocol stack is enabled (ON) or
disabled (OFF).
Item Options Values Explanation
