Chapter 4 Control Panel Functions
4-31
4.18 DISK Menu
Note: This menu selection will only appear if an optional hard disk drive or
compact flash has been installed. See “User Flash, Compact Flash and Hard Disk
Options” for more details.
The Disk Menu provides access to the printer settings that are related to the
optional Hard Disk. Use the following procedure to enter the Disk Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Disk Menu” is shown on the sec-
ond line of the display.
3. Press the SELECT button to enter the DISK menu.
4. Press the NEXT button to move through the submenus: Print, Delete,
Format Disk and Disk Summary.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the system
settings:
WARNING! All files on the Disk will be deleted if the Format Disk function is
selected.
Submenus Procedure for Changing Setting
Print
This selection will read the selected file from
Disk and print it as if it were being received from
one of the input ports.
1. Press NEXT or PREVIOUS to scroll
through the files.
2. Press SELECT to choose and print
the file.
Delete
This selection will delete the selected disk file or
directory from the hard disk. To delete an entire
directory, you must first delete all the files within
that directory.
1. Press NEXT or PREVIOUS to scroll
through the files.
2. Press SELECT to choose and delete
the file.
Format Disk
This selection will reformat the hard disk.
1. Press SELECT to reformat the hard
disk.
Disk Summary
This selection will print a page containing
information about the installed hard disk,
including a list of all the current existing files and
directories.
1. Press SELECT to print the Disk
summary.
