Chapter 4 Control Panel Functions
4-23
Wait Timeout
This submenu allows you to
increase or decrease the length
of time (in seconds) that the
printer will remain in the waiting
state – a job is being processed,
no end-of-file has been detected
and there is no more data to
process. This setting applies to
both PCL and PostScript print
jobs.
00020 0 – 99999 1. Press NEXT or PREVIOUS to
increase or decrease each
digit of the five-digit number.
2. Press SELECT set one digit
and move to the next digit.
3. Press SELECT after changing
the last digit to save this
setting.
Job Timeout
This submenu allows you to
increase or decrease the time
limit (in seconds) for PostScript
jobs. A 0 setting indicates no
timeout. This setting applies
only to PostScript jobs.
00000 0 – 99999 1. Press NEXT or PREVIOUS to
increase or decrease each
digit of the five-digit number.
2. Press SELECT set one digit
and move to the next digit.
3. Press SELECT after changing
the last digit to save this
setting.
Jam Recovery
This submenu allows you to turn
jam recovery on or off.
On On
Off
1. Press NEXT or PREVIOUS to
toggle between ON and OFF.
2. Press SELECT to save this
setting.
Hex Print
This submenu allows you to
print hexadecimal characters.
Off On
Off
1. Press NEXT or PREVIOUS to
toggle between ON and OFF.
2. Press SELECT to save this
setting.
Intellifilter
This submenu allows you to turn
the Intellifilter feature on or off.
On On
Off
1. Press NEXT or PREVIOUS to
toggle between ON and OFF.
2. Press SELECT to save this
setting.
Reset Belt Life Press SELECT to action.
Reset Fuser Life Press SELECT to action.
Reset Toner Life Reset Toner K Life
Reset Toner C Life
Reset Toner M Life
Reset Toner Y Life
Press SELECT to action.
Submenus Default Setting Available Settings Procedure for Changing
Setting
