TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
4-22
4.12 System Menu
The system menu provides access to system settings. Use the following
procedure to enter the system menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “System Menu” is shown on the
second line of the display.
3. Press the SELECT button to enter the System menu.
4. Press the NEXT button to move through the submenus: Factory
Defaults, Display Language, Power Saver, Wait Timeout, Job Time-
out, Jam Recovery, Hex Print and Intellifilter.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the system
settings:
Submenus Default Setting Available Settings Procedure for Changing
Setting
Factory Defaults
This submenu allows you to
reset the printer to U.S. or Non-
U.S. factory defaults.
U.S. U.S.
Non-U.S.
1. Press NEXT or PREVIOUS to
toggle between U.S. and NON-
U.S.
2. Press SELECT to choose and
set the factory defaults.
Display Language
This submenu allows you to
change the language of the
display messages.
English
English
French (Francais)
German (Deutsch)
Italian (Italiano)
Spanish (Espanol)
Portuguese
Dutch
Danish
Norweigan
Swedish
Greek
Polish
Russian
Tur kish
Brazilian portuguese
1. Press NEXT or PREVIOUS to
scroll through the available
languages.
2. Press SELECT to choose and
set the language.
Power Saver 15 (Minutes) 1 – 999 1. Press NEXT or PREVIOUS to
increase or decrease the time.
2. Press SELECT to save this
setting.
