TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
4-2
4.1 Functions of LCD and Lamps
This chapter explains the control panel and its functions, and also
demonstrates how to navigate through the control panel menus and submenus
that allow you to view and change the printer settings. Web access to the
printer is also discussed.
4.1.1 LCD Display and LED Indicators
The LCD display shows status and error messages that inform you of the
current status of the printer, and also displays menus, submenus and printer
settings when you are in the menu system. The display contains two lines of
text, each with a maximum of sixteen characters.
The LED indicators also indicate printer status. The three indicators can each
be on, off, or blinking, indicating different phases of printer operation. The
table below explains the LED indicators.
Error
LCD (16 characters x 2 rows):
Displays messages relating to the
state of the printer.
ERROR lamp (Red):
Lit when there is an error that
requires user intervention, such as a
paper jam, a service call required,
etc.
START/STOP lamp (Green):
Lit when printer is ready to receive
and print jobs and turned off when
printer is not. If no error condition
exists pressing the “Start/Stop” key
which the led is part of toggles the
status.
