TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
2-8
2.4 Checking the Power Source
Check the power source for the printer.
2.4.1 Input Power Requirements
Printer model EU:
z Supply voltage: 220 – 240 VAC
z Frequency: 50 Hz ±2 Hz
Printer model US:
z Supply voltage: 120 VAC ±10%
z Frequency: 60 Hz ±2 Hz
WARNING! Connect the printer to a dedicated wall outlet in compliance with the
specifications of the printer. Connecting the printer to a non-compliant wall outlet may
cause fire or electric shock.
Use a grounded wall socket to prevent an electric shock. Never use a converter plug.
2.4.2 Power Consumption
The printer’s maximum power consumption is 1,300 W.
When determining the power source for the printer, consider its electric power
capacity as well. Should the rated power capacity be exceeded, the ring mains’
circuit breaker may activate.
2.4.3 Precautions
z Ensure that the plug connection is clean. In a damp environment, a contam-
inated connector can draw sufficient amount of current to generate heat and
may, over an extended period of time, cause a fire.
z Always use the power cable provided with your printer. Normally do not use
a power extension, however If it use cannot be avoided then only use only a
correctly rated power extension
z Do not attempt to modify, pull, bend, chafe, or otherwise damage the power
cable.
z Do not place a heavy object on the cable. A damaged cable can cause fire or
electric shocks.
z Never touch a power cable with wet hands. This constitutes an electric shock
hazard.
