A SERVICE OF

logo

Chapter 6 Troubleshooting and Maintenance
6-29
Cleaning procedure
z Removing the belt cartridge
1. Turn off the printer.
2. Open the front cover and pull
the 4 developers out about an
inch. Open the top cover and
leave it fully open throughout
this work.
3. Push the 2 green levers in to
the unlock position and care-
fully remove the belt car-
tridge.
z Cleaning the charging roller
4. Put the belt cartridge onto
clean paper with the photo-
sensitive belt facing upward.
Lever
Top co ve r
Belt cartridge
Photosensitive belt
Belt cartridge
Paper