Chapter 5 Problem Solving 177
Understanding Printer Messages
USE [TYPE]
[SIZE] INSTEAD?
If the requested paper size or type is not available, the printer asks
if it should use another paper size or type instead.
Press - V
ALUE
+ to scroll through the available types and sizes. Press
S
ELECT
to accept the alternate type or size.
WAIT FOR PRINTER
TO REINITIALIZE
The RAM disk setting has been changed from the printer’s control
panel. This change will not take effect until the printer reinitializes.
If you change the mode of the external devece, turn the printer off
and then turn the printer on and wait for the printer to reinitialize.
WRONG ENVELOPE
FEEDER INSTALLED
The envelope feeder you are trying to install will not work for this
printer.
To order an envelope feeder for the printer, see page 36
.
Make sure the is installed correctly (page 109
).
XX.YY
PRINTER ERROR
PRESS GO TO
CONTINUE
A printer error has occurred which can be cleared by pressing GO in
the printer’s control panel.
13.x PAPER JAM
[LOCATION]
Remove jammed paper from the specified location (page 146
).
Open and close the top cover to clear the message.
If the message persists after all jams have been cleared, a sensor
might be stuck or broken. Contact an HP-authorized service or
support provider. (See the HP Support
pages at the front of this user
guide.)
Printer Messages (continued)
Message Explanation or Recommended Action
