basics guide
print from a memory card
31
Once the proof sheet has printed, you can mark the proof sheet to indicate the
photos you want to print, the size of the photos, and the number of photo copies
you want to print. You can then insert the proof sheet into the printer for scanning,
and the printer will print the selected photos to your specifications. For more
information about how to select photos on a proof sheet and then scan it into the
printer, see the next section.
scan a proof sheet
After you print a proof sheet, you can use it to print specific photos from your
memory card.
1 Select the photos you want to print by filling in the circle below each photo
with a dark pen.
2 Select only one choice each in the number of copies section and the layout
section.
Verify that you filled in only one choice each in the number of copies and
layout sections. If you make more than one selection in either of these
sections, an error appears on the LCD screen, and you will need to print a
new proof sheet and start over.
3 Make sure that the memory card is inserted in the memory card slot on the
printer’s control panel.
4 On the printer’s control panel, press the M
ENU button.
5 Press the S
ELECT PHOTOS button until Print special appears highlighted
on the printer’s LCD screen, and then press the OK button.
6 Press the S
ELECT PHOTOS button until Scan proof sheet appears
highlighted on the printer’s LCD screen, and then press the OK button.
