Loading Roll-Fed Media 3-17
10. On the Front Page screen of the control panel, press the Load
Media key.
The control panel presents a list of media types. You can
select a ColorSpan media from the list, or select Custom (at
the end of the list) to specify a new media. The printer’s
Media Wizard feature stores a set of parameters for each
media type, which can be recalled and applied whenever
you change media types. (See “Media Wizard” on page 3-32
for details.)
11. Select the media type you are loading, or create a new media
type.
The control panel displays the current settings for the media
type you chose.
12. Press one of the change keys to change any of the settings,
print mode, or media type, or press the ! key to continue.
◆ If you press one of the change keys, a screen appears to
allow you to change any of the settings. Then press the
! key to continue. See “Media Wizard” on page 3-32 for
information about these settings.
13. Enter the length of the media roll (if it is a new roll) or the
length remaining (if it is a partially used roll), and press the
Enter key to continue.
To skip this step, press Esc without entering a value.
Fig. 3-4. Media settings
