A SERVICE OF

logo

HP Designjet 70/110plus Printer series—Quick Reference Guide
24
3. Pull the printhead cover up and towards you, so that the hook at the front
unlatches itself, and then push the whole cover back so that the printheads are
exposed.
4. Remove the failed printhead by lifting the small handle on the top and using it
to pull the printhead vertically up and out of the printer.
5. Ensure that no tape is covering the printhead contacts. If the tape is present,
remove it.
6. Gently wipe the printhead contacts with a clean, soft, lint-free cloth.
How do I clean a printhead? (continued)