A SERVICE OF

logo

Open as PDF
next previous
82 Removal and replacement EN
Fuser Pressure Plate
1 Remove Printer Covers and Delivery Assembly (Figures 6-9 and 6-10).
2 Remove the (2) screws (Figure 6-11, callout 1).
3 Press the Fuser Plate retainer clips out to release the Pressure Plate (Figure 6-11, callout 2).
4 Rotate the plate around and toward the back. Lift up to remove it (Figure 6-11, callout 3).
Figure 6-11 Fuser Pressure Plate removal
3
2
1
Service.book Page 82 Thursday, September 14, 2000 11:15 AM